Original LTQ 3 in 1 CURER Vaporizer Kit

Specification:

Material: PCTG, Zinc alloy, silica gel Zinc Alloy
Size: 100.5mm*55.3mm*25.1mm
Net weight: 145g
Power on and off: Press the button 5 times in 2 seconds to enter the power
on/off, the screen displays LOGO for 1.5 seconds.
Temperature adjustment range: 60°C-315°C, 5°C/step; 140°F-600°F,
10°F/step. Short press for single step adjustment, long press for quick adjustment.
Power adjustment range: 5W-35W, 0. 5W/step, short-press single-step adjustment. long-press quick adjustment (maximum output 6V, minimum output 1V)
Adaptation resistance range: 0. 38Ω-2.00Ω. The resistance value is between 0.38-0.48 in flower mode; the resistance value is between 0.6-0.7 is concentrate mode; the resistance value is between 1.0-2.0, jump directly to the adapted power mode, this resistance value power mode is only suitable for smoking oil,  the default power is 10W, and the adjustable range is 5 to 11W.
°F/°C mode switch: Turn on the temperature control mode, press the fire button and +button at the sane time. °F/°C mode switch.
Power/temperature control mode switch: Press the fire button 3 times to enter the power/temperature control mode switch.
Coil resistance: 0. 40Ω; 0.65Ω; 1.40Ω.
V: 1500mah
Working temperature: -20°C-85°C
Working voltage: 3.3V-4.2V
Left and right hand mode: Press the button 4 times in succession, the Screen will flip.
Smoking timeout: Press the button to continue heating for more than 20s, stop output, the screen displays “OVER TIME”.
Lock/unlock: Press the “+” and “-” keys at the same time, the screen displays “KEY LOCKED” to lock; press again at the same time, the screen displays “KEY UNLOCK” to unlock. After locking, the power and temperature
control cannot be adjusted, but It can be ignited and heated normally.
No-load reminder: If no load coil is connected, the output will be cut off when heating, the screen will display “CHECK ATOMIZER”.
Short circuit: The coil is short-circuited, and it displays “0.00Ω”. and the output is cut off when smoking, and it displays “ATOMIZER SHORT”.
Low voltage reminder: When Vbat<3.3V+0. 1V, there is no output when the button is pressed, and the screen displays “LOW BATTERY” to remind the user to charge.
Over-temperature protection: the motherboard temperature exceeds 90°C, the screen displays DEVICE TOO HOT.
Charging: USB Type-c 5V/1A; when charging, the screen lights up, the battery symbol on the screen scrolls, and the screen goes out after 20s of full charge.

Curer Vaporizer Kit Includes:

1 x Host device
1 x0.4Ω dry herb coil
1 x0.65Ω concentrate coil
1 x1.4Ω oil coil
1 x Supporting tools
10x Alcohol swabs
1 x Cleaning brush
1 x Duckbill valve assembly
3 x Water tank seal 1
3 x Water tank seal 2
1 x Type-c cable
1 x User Manual